TARISS'S Anal Vibe Up and lower piston possible 3 -stage expansion and contraction x9 -step vibration mode Remote control silicone black

[Product specification]: The maximum diameter of the insertion part is about 38 mm, the maximum diameter of the good part is about 28 mm, the width of the pedestal is about 133 mm, and the total length is about 143 mm. One anal vibe+1 ​​remote control+1 charging carapple, a total of 3 points. * Please be sure to check the size before purchasing.

[Special design]: The can be inserted is a stick, but the middle part is swollen, so it gives you a different feeling of insertion, and the surface has unevenness like a beehive, and the unevenness is strong when inserted. The inside can be friction, and even more pleasure comes from the back. In addition, the surface of the perineum is smooth without unevenness, and when using it, the pleasure of being stimulated simultaneously is irresistible when used when used.

[Various use]: 1, the insertion part is inserted into the anal, the good part can be stimulated, the gold ball, etc. can be stimulated, causing a transcendental stimulus. 2. In the case of women, it is possible to insert it into the anal and then insert the good part into the vagina.

[3 -stage telescopic X9 -step vibration mode]: The vibration is transmitted to the back because the motor is built -in, and the pleasure of fluttering runs around. By pressing the piston button as well as vibration, the insertion part can be automatically pistoned, so you can use it more easily without having to put it in and out. In addition, there is a three -step telescopic x9 -stage vibration mode, so you can switch mode depending on your preference and enjoy how many kinds of irritation.

[Luxury material]: High -quality liquid silicon has been adopted, so it is as soft as metal and does not hurt inside, but can be used without any strange odor. Moreover, if the USB rechargeable type does not need to be replaced, it can be used anywhere and it is very convenient.

【Method of operation】:
1. Press and hold the power button on the main unit to be on standby. At that time, the lamp is lit.
2. When operating with the main unit, press the power button once in the waiting state to make a piston. Press again and switch the mode. Press the vibration button once to vibrate. Press again and switch the mode. If you want to stop the piston/vibration, press and hold the vibration button/power button for 3 seconds to turn off. At that time, the lamp turns off.
3. When operating with a remote control, make the main body first.
4. The main unit is waiting, and the piston/vibration motor can be launched by pressing the "+" and "-" button in the remote control. Once again, press "+" and "-" and switch the piston/vibration mode. If you want to stop, press and hold the power button for 3 seconds to stop. At that time, the body will be turned off.